Home/Services/Energy Assessment

Service · Energy Assessment

Start with how the site actually uses energy.

We avoid standard averages. Before proposing components, we study your bills, tariffs, loads and site conditions.

Metering and control panel (representative image)
Representative image
What the assessment reads

Your load shape decides the system, not the roof.

We compare how your site actually uses energy through the day with what solar can supply and where tariff windows fall. The shapes below are typical; your assessment uses your bills and metering.

24-hour site load profile

Factory · two shifts: Production follows the shift pattern; the second shift runs into the evening peak.

Illustrative shape · normalised · not a calculation
Peak demand and time-of-day exposure

Grid energy drawn in each tariff window and the highest demand of the day, before and after storage. Bars are relative to the no-storage case; actual tariffs and savings depend on the utility category and are calculated only from your bills.

Illustrative shape · normalised · not a calculation
Input parameters

Nine blocks of site evidence.

01Customer & site profile

Location, climate and solar resource.

02Electricity connection

Service voltage, transformer and metering.

03Recent / 12-month bills

Baseline consumption and billing structure.

04TOD tariff exposure

Peak windows and cost structure.

05Existing solar

Arrays, inverters and interlocks already installed.

06Operating hours

Weekly operating profile.

07Major motor loads

Starting currents and inductive machinery.

08Backup requirements

Critical loads, outage history and transfer logic.

09Future expansion

EV chargers, new machines and growth.

Assessment depths

As deep as your site needs.

Level 1Bill-led screening

Maps bills and climate data. Gives preliminary direction, never a locked design.

Level 2Physical site survey

Electrical audit of space, cable routes and switchgear.

Level 3Samvora kit study

Temporary monitoring to record detailed load profiles.

Level 4Engineering review

Site findings, grid parameters and final design requirements compared.

Deliverables

What you receive.

OutputEnergy profile

Baseline consumption over a typical year.

OutputCurrent system picture

Switchgear, space and structural capacity.

OutputTOD insight

Peak tariff exposure and high-cost windows.

OutputSolar opportunity

Estimated layout from available roof or land.

OutputStorage opportunity

Battery scenarios for demand, TOD and backup.

OutputEvidence gaps

What is still missing, and the next study needed.

Every early output is labelled preliminary. Raw bill calculations are never used as a final execution design.

Explore before you enquire

See how this would work at your site.

Answer a few visual questions and see your site today and with Samvora: at midday, in the evening peak and in a power cut. No sign-up; nothing is sent until you choose.

Energy assessment

Start with how your site actually uses energy.

Share a few details and your recent bills. A Samvora engineer reviews your load, tariff and reliability needs before anything is proposed.

Privacy information

Privacy policy information

A separate public privacy-policy page is not yet published. Contact Samvora about data access, correction or other privacy questions before sharing sensitive information.

Contact Samvora